Product Features
Rear shaft length is 0.375 inches , diameter is 0.1247 inches
Product Technical Spec.
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
0.9688 inches
Pilot Length:
0.0620 inches
Overall Length:
2.951 inches
Undercut Diameter:
1.625 inches
Undercut Width:
0.0730 inches
Body Diameter:
1.761 inches
Shaft Diameter:
0.1247 inches
Shaft Length:
0.625 inches
Body Length:
1.901 inches
Overall Diameter:
2.218 inches
Mounting Lip Diameter:
1.7500 inches
Mounting Lip Depth:
0.0930 inches
Shaft Style:
Round, slotted
Actuator Type:
Double ended shaft
Effective Electrical Rotation In Deg Angular Rotation:
165.0
Maximum Starting Torque:
2.10 inch-ounces
Shaft End Play:
0.00500 inches
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Clamp ring
Cubic Measure:
7.345 cubic inches
Electrical Resistance Per Section:
1.0 gallons per minute c and better select
Electrical Resistance Per Section:
100.0 percent, rated amperes c and better finish
Electrical Resistance Per Section:
100.0 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section:
5.0 percent, rated amperes c and better v.G. Stepping
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation:
67.23 1st section
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation:
67.23 2nd section
Rotary Actuator Travel In Angular Deg:
360.0
Function Conformity Tolerance Per Section:
-0.30/+0.30 all sections
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-20.0/+20.0 all sections
Power Dissipation Rating Per Section In Watts:
2.0 free air all sections
Function Conformity Per Section:
All sections absolute conformity
Fixed Tap Quantity Per Section:
1 1st section
Fixed Tap Quantity Per Section:
1 2nd section
Tap Location Tolerance Per Section:
-10.0/+10.0 degrees angular rotation 1st section
Tap Location Tolerance Per Section:
-10.0/+10.0 degrees angular rotation 2nd section
Resistance Tolerance Per Section In Percent:
-10.0/+10.0 all sections
Actuator Travel Control Feature:
Continuous motion
Function Characteristic Per Section:
All sections table
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
85.0 all sections
Test Data Document:
55972-1960923 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
14 turret
Item Name:
Potentiometer,trimmer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
